• Address: Shahrah-e-Liaquat,
    Serai Quarters 74000, Karachi

  • Call Us: +92 319 3961178

    Email Us: info@sshussain.com

Corrosion-Resistant Instrumentation for Sugar Mills: What to Look For

   Quick Answer Corrosion-resistant instrumentation for sugar mills uses stainless steel on every part that touches the process. A diaphragm seal protects instruments on juice and syrup lines. Radar level sensors work in steamy tanks, but you must match the type to the liquid. Check material, temperature, and pressure before you order.   Why do

sshussainadmin

sshussainadmin

 Why Pressure Gauges Clog on Wastewater Lines, and How a Diaphragm Seal Helps

    Quick Answer Pressure gauges clog on wastewater because solids, grease, and sticky sludge block the small port that leads to the gauge. A diaphragm seal fixes that. It puts a thin metal membrane between the wastewater and the gauge, so the wastewater never gets inside.   Why do pressure gauges clog on wastewater

sshussainadmin

sshussainadmin

How to Choose Diaphragm Seal Material for Juice and Dairy

Quick Answer 316L stainless steel is the right diaphragm seal material for most juice and dairy lines. Tantalum is only for very strong acids. Before you buy, check the fill fluid, the surface finish and the material certificate too, so the seal actually suits your process.   What Is a Diaphragm Seal and Why Does

sshussainadmin

sshussainadmin

 How Often Should Pressure Gauges Be Calibrated in a Pharma Plant?

    Quick Answer Most pharma plants calibrate critical pressure gauges every 6 months and monitoring-only gauges every 12. GMP rules don’t give you one fixed number. Your plant sets the interval based on risk, writes it down, and then sticks to it. If a gauge takes a shock or an overpressure hit, calibrate it

sshussainadmin

sshussainadmin

How to Choose a Flow Meter for Wastewater

  Quick Answer   For most wastewater lines, an electromagnetic flow meter is the best choice when the pipe runs full and you can install the meter permanently. If cutting into the pipe is not an option or you need a portable reading, a clamp-on ultrasonic flow meter is a better alternative. In either case,

sshussainadmin

sshussainadmin